Features – base – Clarity CLS 45i User Manual

Page 13

Advertising
background image

Features and controls on the faceplate (top)
of the base.

POWER (also Low Battery) indicator.

This light is the left most of three lights
above the keypad. It signals you to alert you
to the status of the backup batteries and
the AC power. See chart on page 12.

IN USE light. This green light is ON when

the telephone line is in use. When transfer-
ring a call, this light changes from a steady
light to a flashing light.

CHARGE indicator. This red light is ON

when the handset is in the cradle.

KEYPAD buttons. The buttons on the

keypad are backlit. They light up when you
press SPEAKER.

MEMORY buttons. M1 through M4 and

ER5 through ER7. M1 through M4 are
for frequently-called numbers and ER5
through ER7 are for emergency numbers.
Each stores a telephone number of up to
16 digits in length. These are one-touch
buttons. See pages 21-22.

PROG button. Press when storing frequent-

ly called and emergency telephone numbers
into memory. See page 22.

INTERCOM (and Page) button. Press

to page the handset, transfer a call or for
conversation between the base and hand-
set. It can also be used to connect a three-
way call between the handset, base and a
third party on another telephone line.

FLASH button. Press to access special

services from the telephone company such
as Call Waiting and other subscribed services.

REDIAL (and Pause) button. Press to

redial the last number you called. Pause lets
you insert an extension or menu choice

when storing numbers. It lets you program
numbers up to 32 digits. See additional
description on page 5.

SPEAKER button. Backlit button lights up

when Speaker is turned On. Press it and it
provides hands-free communication with
adjustable volume.

Note: In Speaker mode, only one party at a

time can be heard. It is best that you wait
until the other party is finished speaking
before you speak. Otherwise parts of the
conversation may be lost.

MUTE button. Press to turn the micro-

phone on the base ON and OFF. It is for
added privacy.

SPEAKER VOL slide control. Use this

to adjust the volume of the speaker on the
base.

ANTENNA. Keep the antenna raised for

the maximum reception strength and to
minimize interference on the line.

VISUAL RINGER. This flashes a bright red

light when the telephone is ringing.

PHONE NUMBER DIRECTORY.

Included is a self-adhesive plastic sleeve
and several directory listing cards on which
you can note the phone numbers you have
stored in memory buttons and other num-
bers if you choose. Simply peel the backing
off the sleeve and affix it to the base in the
lower area of the handset cradle as shown.
You may remove the directory cards as
often as you wish to make changes by slid-
ing them out of the sleeve and then sliding
them back. NOTE: writing the numbers in
pencil will make changes easier to make
and will extend the life of the directory
cards. Extra cards are included.

9

Features – Base

Advertising