Important safety instructions – Clarity CLS 45i User Manual

Page 2

Advertising
background image

ii

When using your telephone equipment,
basic safety precautions should always be
followed to reduce the risk of fire, electric
shock and injury to persons including the
following:
1. Read and understand all instructions.
2. Follow all warnings and instructions

marked on the telephone.

3. Do not use this telephone near a

bathtub, wash basin, kitchen sink or
laundry tub, in a wet basement, near
a swimming pool or anywhere else
where there is water.

4. Avoid using a telephone (other than a

cordless type) during a storm. There
may be a remote risk of electrical
shock from lightning.

5. Do not use the telephone to report a

gas leak in the vicinity of the leak.

6. Unplug this telephone from the wall

outlets before cleaning. Do not use
liquid cleaners or aerosol cleaners on
the telephone. Use a damp cloth for
cleaning.

7. Place this telephone on a stable surface.

Serious damage and/or injury may
result if the telephone falls.

8. Do not cover the slots and openings

on this telephone. It should never be
placed near or over a radiator or heat
register. This telephone should not be
placed in a built-in installation unless
proper ventilation is provided.

9. Operate this telephone using the

electrical voltage as stated on the
base unit or the owner’s manual. If

you are not sure of the voltage in
your home, consult your dealer or
local power company.

10. Do not place anything on the power

cord. Install the telephone where no
one will step or trip on the cord.

11. Do not overload wall outlets or

extension cords as this can increase
the risk of fire or electrical shock.

12. Never push any objects through the

slots in the telephone. They can touch
dangerous voltage points or short out
parts that could result in a risk of fire
or electrical shock. Never spill liquid
of any kind on the telephone.

13. To reduce the risk of electrical shock,

do not take this phone apart. Opening
or removing covers may expose
you to dangerous voltages or other
risks. Incorrect reassembly can cause
electric shock when the appliance is
subsequently used.

14. Unplug this product from the wall

outlets and refer servicing to the
manufacturer under the following
conditions:

A. When the power supply cord or

plug is frayed or damaged.

B. If liquid has been spilled into the

product.

C. If the telephone has been exposed

to rain or water.

D. If the telephone does not operate

normally by following the operat-
ing instructions. Adjust only those
controls that are covered by the

Important Safety Instructions

Advertising