Classe Audio CDP-102 User Manual
Page 28
28
status Th
e status screen provides several items of information on the currently playing
disc, as well as access to information on the software and internal sensors of the
disc player.
version info Th
e version info button on the status screen takes you to the version
information screen. From time to time Classé develops new software that
adds features or enhances the operation of the disc player. Each new software
version has its own Version Number. Th
e Version Info Screen displays the
Version Number of the software that your unit is running. Th
e latest software
is always posted on the Classé website (www.classeaudio.com). If the version
number displayed on the Version Info Screen is lower than the version posted
on the Classé website, you may want to update your unit. Simple and detailed
updating instructions are also provided on the website. If you ever have occasion
to call our technical support people to ask a question not covered in this manual,
they may want to know precisely what software version software your unit is
running. Having this information available will help them to give you the best
possible service.
sensors Th
e sensors button on the status screen takes you to the sensors screen, which
displays information about several internal sensors within the disc player. It is
unlikely you might ever need the sensor information, unless directed to do so by
a customer service representative at Classé in order to help troubleshoot some
unexpected problem.
CAN-Bus Classé’s Controller Area Network, or CAN-Bus, opens the way to a new level
of interaction between our Delta range of amplifi ers, preamps, processors and
source components. When the CDP-102-202 is connected with CAN-Bus,
the diff erent elements of a Delta series system are in constant communication,
creating a “global” network that delivers system wide status information and
shared operational features, all through the touchscreen display.
features CAN-Bus will allow a single Delta series touchscreen to:
• Display status information for every connected unit, including amplifi ers
which do not have a touchscreen display.
• Create a “PlayLink” that allows an SSP or Preamp to automatically switch
to the correct input when a Delta series source component starts playback.
• Adjust the global system brightness.
• Confi gure the entire system to go in and out of standby at the touch of a
button and also bring individual components in and out of standby.
• Mute any connected unit.