Troubleshooting – Classe Audio CDP-102 User Manual

Page 42

Advertising
background image

42

Troubleshooting

In general, refer any service problems to your Classé dealer. Before contacting
your dealer, however, check to see if the problem is listed here. If it is, try the
suggested solutions. If none of these solves the problem, contact your Classé
dealer.

1

My disc is skipping.

Gently clean the disc itself using a damp, soft cloth, wiping along

the radius of the disc rather than around the circumference.
(Cleaning discs in the manner minimizes the chance of damaging
the disc.)

Th

e disc itself may already be damaged. Try several other discs, to

see whether the problem is widespread or limited to a particular
disc.

2

There is no sound and the Standby LED is not lit.

Ensure the player is plugged into the AC mains, and that the AC

mains are operating normally.

Check that the main power switch on the rear of the unit is on.
Your display may be set to timeout, and the disc player may

simply be in Pause or Stop. Touch the screen to reactivate it so
you can see the state of the unit, or simply press the Play key on
the remote control.

Unplug the unit for at least thirty seconds and then plug it in

again; try powering it up. (Sometimes a brownout or short-term
loss of power might require a restart.)

Verify that the AC mains is not out of range. Th

e unit will

automatically attempt to protect itself from improper AC mains
voltages by not powering up.

Check the fuse by removing the AC cord from the back of the

unit and detaching the fuse holder directly above the AC inlet.
In the event that the fuse is blown, the fuse holder also contains a
spare

If none of these solutions work, please consult your Classé dealer

for assistance. Th

e are no user-serviceable parts inside your unit.

3. A disc was inserted, but the machine rejected it and asked for

another disc to be inserted.

Check that the disc is compatible with your disc player. It will

play CD Audio, DVD-Video, DVD-Audio, MP3, WMA,
Video-CD, and S-VCD discs.

Ensure that the disc surface is clean, and try reinserting it.
Check that the label side of the CD is facing up.

Advertising