Classe Audio CDP-102 - Manual (Page 31)

31
CAN-Bus shared features Th e following CAN-Bus features are shared by all models.
configuration Selecting confi guration will present the CAN-Bus confi guration screen
allowing access to name, global brightness, and global standby features.
operate Th e operate settings allow you to bring the target unit in and out of standby, or
mute. Th is key will be disabled for the unit whose touchscreen you are using to
access CAN-Bus.
AC status Th e AC status screen displays information from the target unit’s electrical supply
sensors. Two screens are available, with the second accessed by selecting more.
status Th e status screen is the simplest way to access essential information about
the target unit. It displays the target unit’s model number, software version,
operational status and serial number.
name Allows you to set the name that this component will be listed under in the
CAN-Bus devices screen. Th e name will appear next to the unit model and serial
number, and facilitate the identifi cation of units in large systems.
global brightness By setting all your components to global brightness you can adjust the
touchscreen and LED brightness for your entire system by changing the
brightness of a single touchscreen. All CAN-Bus software updates automatically
set the updated unit to Global Brightness. If you want a particular unit to be
excluded from Global Brightness, deselect Global Brightness for that unit.
global standby By setting all your components to global standby you can bring your entire
system in and out of standby by pressing the standby button of any unit or
remote. All CAN-Bus software updates automatically set the updated unit to
global standby. If you want a particular unit to be excluded from global standby,
deselect global standby for that unit.