Canon HF M31 - Manual (Page 93)

Video
Š 93
NOTES
• A video snapshot scene can be captured only during playback; it can-
not be captured during playback pause mode.
• The captured video snapshot scene is saved to the same
memory that contains the source scene.
• Video snapshot scenes cannot be captured from any of the following
types of scenes.
- Scenes shorter than 1 second
- Scenes that were edited using the supplied software ImageMixer 3
SE and were then written back to the camcorder ( only) or a
memory card.
• When the source scene is itself a video snapshot scene, you may not
be able to capture a video snapshot scene depending on the length of
the source scene and the length currently selected for video snapshot
scenes.
• When you start capturing a video snapshot scene less than 1 second
from the end of the scene, the video snapshot scene will be captured
starting from the beginning of the following scene.
• During the playback of video snapshot scenes captured from a previ-
ously recorded movie, you may notice some anomalies in the picture/
sound at the point where the playback switches to a new scene.
Capturing Photos
You can capture a single photo or a series of photos. The size of the
captured photos will be [
H 1920x1080] and it cannot be changed,
but you can select the photo quality.
Please read the IMPORTANT section (
0 94) before using an Eye-Fi
card.
To select the photo capture settings
Operating modes:
[MENU] 8 8 8 [Photo Capture from Video] 8
[ A Single Photo] or [B Photo Sequence] 8
[ f]
Continue from the same menu:
[Photo Capture Quality] 8 Desired photo quality* 8 [ a]