Casio EX-Z400 EN - Manual (Page 114)

114
Printing
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
.
To set up the camera before connecting to a printer
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [6].
3.
Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.
Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the camera
to your printer’s USB port.
• The camera does not draw
power over the USB cable.
Make sure the camera’s
battery is sufficiently
charged before connecting.
• Make sure that you insert
the cable connector into the
USB/AV port until you feel it
click securely into place.
Failure to insert the
connector fully can result in
poor communication or
malfunction.
• Note that even while the
connector is fully inserted,
you still will be able to see
the metal part of the connector as shown in the illustration.
• When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
Connecting Directly to a PictBridge Compatible Printer
USB
USB cable
USB port
USB/AV port
Making sure that the 6 mark on the camera is aligned
with the 4 mark of the USB cable connector, connect
the cable to the camera.
Large connector
Small connector