Isolating moving subjects (multi-motion image) – Casio EX-Z400 EN User Manual

Page 62

Advertising
background image

62

Using BEST SHOT

NOTE

• You can shoot with the self-portrait feature in combination with a continuous

shutter (CS) mode (page 39). Operation is the same as that when a continuous
shutter (CS) mode is used in combination with Auto Shutter. See page 72 for more
information.

IMPORTANT!

• If the camera remains in Auto Shutter standby without releasing the shutter, you

can record an image by pressing the shutter button all the way down again.

• Shooting with the self-portrait feature may produce a blurred image when shooting

in areas where lighting is dim, which results in a very slow shutter speed setting.

• The Auto Power Off (page 146) trigger time is fixed at five minutes while the

camera is in Auto Shutter standby. Sleep (page 145) is disabled while Auto Shutter
being used.

Multi-motion Image can be used to isolate a moving subject
within a series of multiple images and places them against
a stationary background. Make sure that the camera is not
moving or shaking when shooting with Multi-motion Image.

1.

Press [BS] and then select the “Multi-motion
Image” scene.

2.

Press the shutter button to start shooting.

Continuous Shutter shooting will stop after some time, and the resulting
composite image will appear on the monitor screen.

• Keep the camera still until all of the continuous shutter images are recorded.
• When using this feature, image size is fixed at 3M (2048

x

1536 pixels).

Isolating Moving Subjects (Multi-motion Image)

Advertising