Casio EX-Z400 EN - Manual (Page 89)

89
Viewing Snapshots and Movies
.
Dividing Up All CS Groups
1.
While a CS group folder is displayed, press [MENU].
2.
Use [
4
] and [
6
] to select “PLAY” tab.
3.
Use [
8
] and [
2
] to select “Divide Group” and then press [
6
].
4.
Use [
8
] and [
2
] to select “Divide All Groups” and then press [SET].
5.
Use [
8
] and [
2
] to select “Yes”, and then press [SET].
• Once a CS group is divided, it cannot be regrouped.
1.
In the PLAY mode, use [4] and [6] to scroll through the images until
the one you want is displayed.
2.
Slide the zoom controller towards z (
[
) to
zoom.
You can use [8], [2], [4], and [6] to scroll the
zoomed image on the monitor screen. Slide the zoom
controller towards w to unzoom the image.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is
currently displayed.
– To exit the zoom screen, press [MENU] or [BS].
– Though the maximum image zoom factor is 8X,
certain image sizes may not allow zooming up to
the full 8X.
• Pressing [SET] will lock the current zoom factor for
the on-screen image. You can then use [4] and [6] to scroll between images,
using the same zoom factor. Pressing [SET] again will unlock the zoom factor
and allow you to use [8], [2], [4] and [6] to move around the currently
displayed images.
Zooming an On-screen Image
Image area
Current display area
Zoom factor
B