CDA RV 1001 - Manual (Page 44)

44
1/2” BSP
(male)
Left gas
inlet pipe
Right gas
inlet pipe
Gas Connection
Cat: II 2H3+
The gas supply must use the nearest gas inlet pipe which is located at the left
or the right hand side at the rear of the appliance (figs. 42a - 42b).
The hose should also be connected in such away that it does not touch the
floor.
To screw the connecting tube operate with two spanners (fig. 41).
The unused end inlet pipe must be closed with the plug interposing the
gasket.
After connecting to the mains, check that
the coupling are correctly sealed, using soapy
solution, but never a flame.
Plug
1/2” BSP
(male)
Left gas
inlet pipe
Right gas
inlet pipe
Plug
Fig. 42b
Fig. 42a
Fig. 41
mod. RV 1001 ..
mod. RV 901 ..