Creda Single Oven - Manual (Page 23)

3. CONTROL PANEL / TRIMS / INNER DOOR PANEL & GLASS
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish with a
clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to prevent
any build up of soiling which may detract from the
appearance of the cooker. The recommended method
of cleaning is to wipe over the trims with a clean, soft
cloth wrung out in hot water, or mild non abrasive
cleaner. (If in doubt try the cleaner on a small area of trim
which is not noticeable in normal use), then after wiping
with a cloth wrung out in clear water, dry with a clean, soft
cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be
washed. Stubborn stains can be removed by using a well
soaped, fine steel wool soap pad.
4. REPLACEMENT OF THE OVEN LAMP
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove the lens.
Carefully unscrew the bulb anti-clockwise. Fit
replacement bulb (25W 300°C SES). and refit lens.
5. HOW TO CLEAN THE LAMP LENS
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove. Clean with a non-abrasive
cleansing cream and refit lamp lens.
CARE AND CLEANING
23
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass.
Warning: Before removing lamp lens, please ensure that the
electricity supply to the appliance is switched off and the
appliance is fully cold.
Warning: Before cleaning lamp lens, please ensure that the
electricity supply to the appliance is switched off and the
appliance is fully cold.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass lens
TRIMS
OVEN
DOOR
MAIN OVEN LAMP
MAIN OVEN LAMP