Clarion S100 - Manual (Page 23)

20
programming options
Programming options control what your system does during normal
operation, and require few or no additional parts. However, some may
require additional installation labor.
The following is a list of the program settings, with the factory settings
in Bold:
➤ Active arming (only with the remote) or passive arming (auto-
matic arming 30-seconds after the last door has been closed).
➤ Arming/disarming confirmation siren chirps on or off.
➤ The ignition controlled door lock feature on or off: With this
feature on, the doors will lock three seconds after the ignition
is turned on, and unlock when the ignition is turned off. The
system will not lock the doors when the ignition is turned on
with any door open. If your installer is programming the
security system with the Pro Security Programmer, ignition
lock and unlock are independent features and can be
programmed separately.
➤ Passive door locking (with passive arming) or active door
locking (only when arming with the remote). Passive locking
allows the vehicle's doors to lock when the security system
passively arms (after the 30 second countdown). This feature
only works if passive arming has been programmed.
nnoottee:: When programmed for passive arming and active
lock, if the system is disarmed without a door being opened,
the system will relock the doors when it passively rearms.