Anti-carjacking triggered sequence – Clarion S100 User Manual

Page 28

Advertising
background image

25

it will initiate its triggered sequence (see below) if any door is opened

and closed. If you are forced from the vehicle, the system will trigger as

the door is opened and closed. This is how the system works to com-

bat intersection carjacking. To protect against parking lot carjacking,

arm the Anti-Carjacking System before leaving the vehicle. The system

will now trigger automatically the next time you or anyone drives the

vehicle. This helps to protect the vehicle if someone takes your keys and

remote by force in a parking lot.

anti-carjacking triggered sequence

Fifteen seconds after the last door has closed, the system’s status LED

will begin flashing. This delay is intended to allow you time to distance

yourself from your vehicle in the event of a carjacking.

Forty-five seconds later, the siren begins chirping and the parking

lights begin flashing. This time could be used to notify authorities that

your vehicle has been hijacked, and tell them what the Anti-Carjacking

system will do next.

Fifteen seconds after the siren chirps begin, the siren’s output will

change to a continuous blast.

From this point on, when the ignition key is turned off, the system will

immediately turn on the starter kill. This will prevent the vehicle from

being restarted, thus immobilizing it at that spot.

Three minutes after the constant siren output begins, the flashing

parking lights and the siren will stop. The starter kill will remain active

nnoottee:: If the Anti-Carjacking system is armed while operating
the vehicle and not disarmed prior to leaving the vehicle, it is
still armed and will trigger the next time the vehicle is driven.

Advertising