Cardo G4 - Manual (Page 8)

NOTE: For best audio results, make sure that both of your speakers
actually touch your ears.
Please visit us at www.cardosystems.com/support/faq for other
useful tips.
5.4 ATTACHING AND REMOVING THE G4 FROM THE
HELMET CLAMP
ATTACHING:
Slide the G4 sideways (i.e. horizontally) along the
sliding panel until a clicking sound indicates that
it is locked in place.
à slide G4 sideways
REMOVING:
Your G4 can be removed for charging or
storage by sliding the G4 sideways.
ß push G4 with your thumb
5.5 USING THE FLIP-UP ANTENNA
The flip-up antenna allows you to achieve
the maximum intercom range between
bikers. To open the antenna, simply press
gently against the protruding tab (at the tip
of the antenna) towards the direction of the
helmet. The internal spring will then cause the antenna to flip up.
To close the antenna, just push it back into its horizontal state until it
is locked in place.
NOTE: The sole purpose of the antenna is to increase intercom range
between bikers. There is no need to open it when using your mobile
phone, FM Radio or MP3 Player but you can do so without concern.
6. CONNECTING BLUETOOTH ENABLED MOBILE
PHONES, GPS OR MP3 (A2DP) DEVICES
Multiple Device Connectivity (“MDC”) with Bluetooth
compatible Devices
scala rider G4 or other
scala rider headset
Up to 1 mile / 1.6 km Bike-to-
Bike Intercom range
between 3 separate bikers or
2 couples on
2 motorcycles
Mobile phone &
A2DP connectivity
Driver-to-Passenger
Full Duplex
Intercom
Connection
Driver-to-Passenger
Full Duplex
Intercom Connection
Built-in
FM radio
GPS MP3
player
Thanks to MDC technology the G4 offers parallel connectivity as
follows*:
➤ Intercom with up to two other scala rider units
➤ Bluetooth enabled Mobile Phone / GPS device
➤ A2DP enabled MP3 Player or A2DP Adapter
NOTE: If you plan to use your mobile phone while using a Bluetooth GPS
device, then you should pair your mobile phone to the GPS and not to the
G4.
* see restrictions under 9.10 b
8 scala rider ® G4