Keri Systems BioPointe - Manual (Page 35)

Biopointe Central User’s Manual
Advance Features 31
Device properties
Properties Options Description
User ID 3 – 10 # of user digits used as the User ID. When using a card,
this MUST be set to 5.
DD/MM/CCYY Date format
MM/DD/CCYY
Set the date format of the device. Eg. 25/02/2003 or
02/25/2003
12 hour mode Time format
24 hour mode
Set the time format of the device. 12 hour mode -
hh:mm:ss tt time format. 24 hour mode – HH:mm:ss time
format
Multiple FP
Verification 1 – 3 Device allows one to three Fingerprint verification.
Disable Pin Only
Verification
Enable
Once this option is enabled. The device only allows PIN
Only verification. It does not require fingerprint or card.
Wiegand 26 bits – 40 bits The types of wiegand format.
Disable
Enabled Wiegand out
TS Controller
Refers to the wiegand data is being sent out to the external
controller upon a successful authentication. TS Controller
option meant Biopointe controller not other vendor
external controller.
Site Code --
Land Code --
The two parameters that existed in the format of the
contactless card.
Disable
Legic
Mifare
Barcode Auxiliary Device
Magstripe
These reader options are auxiliary devices supported by
Biopointe. An example of a use of such an input device is
to read in the ID of the associated card instead of using the
keypad.
Disable
Wiegand Ack
One-To-Many
Station locking External Input Type
Switch To Card
An external sensing is provided by Biopointe to detect the
occurrence of a specific event. These types of events that
can currently be detected and supported by Biopointe