Keri Systems BioPointe - Manual (Page 40)

Biopointe Central User’s Manual
Advance Features 36
A) Device Log Type
Device Log allows you to select which kind of Log information is to be exported namely: All, Time
Attendance, Door Status, System Configuration and Failed Attempts. Please refer to Log Report for the
definition of the type of logs. The default setting is All Log where all the 4 types of Log information are to
be exported.
B) Export Log List
Export Log List allows you to select the fields of the information that is to be exported. All the Log fields
are listed in the Log Fields List. You can add the fields of interest from this list to the export list or remove
the unwanted field from the export list. You can also arrange the position of the fields in the Export List so
that the data will be exported according to the position of the fields listed.
NOTE:
The first field on the top of the export list is the first field to be exported.
C) Set Delimiter
When the Delimiter option is enabled, the character fields that are exported into the ASCII text file will be
enclosed with a double quotation mark. If the option is disabled, the double quotation marks will not be
present. (Eg. Field1, “Field2”, “Field3”, “Field4” where field2, field3 and field4 are character fields.)
D) Separator
Separator option allows you to choose which kind of separator that the ASCII text file has. A Separator
Character separates the fields in the ASCII text file. There are 3 kinds of separators provided in this option
namely Comma, Fixed and Other.
Comma separator separates the field with a comma (,). Eg field1, field2, field3, field4, field5
Fixed separator separates the field using fixed field length. Please refer to the Appendix B: Log Field Table
for the field size. Eg field1 field2field3 field4 field5
Other separator separates the field with a user-defined character. Eg. Selected Other: &. The txt file:
field1&field2& field3&field4&field5
NOTE:
When the fixed separator selection is chosen, fields will be separated based on the
defined size for each field in the Fill Default Box. The size defined for each field will take
its respective default value if the checkbox is not checked for that particular field. On
the other hand, if the checked box is checked, the size defined for the field will take the
user entered value.
n
n