Keri Systems BioPointe - Manual (Page 81)

Biopointe Central User’s Manual
Appendix C 77
8 INVALID_PARAMETER 0xA6 An invalid parameter was passed in to the
function
9 RECEIVE_FOOTER_WRONG 0xA7 Expected ETX, indicating the end of a packet,
was not received
10 RECEIVE_HEADER_WRONG 0xA8 Expected STX, indicating the start of a packet,
was not received
11 FAL_RECEIVED 0xA9 Error code received from Reader
12 NAK_RECEIVED 0xAA Not-Acknowledge received from Reader
(Reader is busy)
13 SCHEDULE_NUMBER_NOT_FOUND 0xAB Specified schedule number was not found
14 CALENDAR_YEAR_NOT_FOUND 0xAC Specified calendar year was not found
15 ABORT_FINGER_CAPTURE 0xAD Fingerprint capture was aborted
16 FAIL_TO_LOAD_CONVERT_DLL 0xAE Fail to load the DLL needed to convert the
template to proper format
17 FAIL_TO_CONVERT_TEMPLATE 0xAF Fail to convert template to proper format
18 CRC_MISMATCH_AT_HOST 0xB0 CRC mismatch of the Host received packet
19 NO_SCHEDULE_SETS_TO_UPLOAD 0xB1 No schedules to upload from the device
20 INVALID_REPLY 0xB2 Received packet was not expected for the
command executed although the packet was
received without any errors.
21
WIEGAND_FORMAT_NOT_SUPPORTED_BY_D
EVICE
0xB3 The Wiegand Format specified during setting of
device properties command is not supported by
the firmware of the device used.
22 INVALID_CALENDAR_YEAR_TO_DOWNLOAD 0xB4 The calendar year to download is invalid.
23 TOO_MANY_CALENDAR_YEARS_TO_DNLOAD 0x90 The max calendar years to download have
exceeded the limited of 2.
24 NO_CALENDAR_YEARS_CREATED_AT_HOST 0x91 No calendar years created at Host system.
25 NO_CALENDAR_DATA_TO_UPLOAD 0x92 -
26 NO_SCHEDULE_SETS_CREATED_AT_HOST 0x93 No Schedule sets were created at the Host
system.
27 EXCEPTION_GENERATED 0x95 Errors during file access
28 FILE_NOT_FOUND 0x96 Errors during file access
29 ERROR_FILE_READ 0x97 Errors during file access
30 ERROR_FILE_WRITE 0x98 Errors during file access
31 ERROR_FILE_CREATE 0x99 Errors during file access
32 INVALID_SCHEDULE_CNT_IN_INI_FILE 0x9a There was a invalid entry in the Sch.ini file
33 GENERAL_FILE_SYSTEM_ERROR 0x9b Errors during file access
34 ERROR_FILE_SIZE 0x9c Error during file access
35 FAIL_TO_READ_KEY 0xEA Unable to read the system key