KERN & SOHN AEJ 200-4CM - Manual (Page 62)

• Determining reference weight by weighing
The function DETERMINE REFERENCE WEIGHT is allocated to the F2-key.
4x
The previous setting will be displayed.
(example)
The setting is flashing. Press F2 to make
entries for the F2-key
(example)
The previous setting for the F2-key will
be flashing.
Use the arrow keys to select
DETERMINE REFERENCE WEIGHT.
This completes the allocation of the
function used to determine the reference
weight by weighing to the F2-key.
In piece counting mode this enables you to invoke the function used to determine
the reference weight by pressing F2.
62 AEJ-C/AES-C/PLJ-C-BA-e-1412