KERN & SOHN AEJ 200-4CM - Manual (Page 95)

• List of remote control commands
Command Description
Z Balance zeroing
T Tare weighing scale
OT Enter tare value
UT Set tare
S Send stable result in standard unit
SI Send result immediately in standard unit
SU Send stable result in current unit
SUI Send result immediately in current unit
C1 Enable continuous data output in standard unit
C0 Disable continuous data output in standard unit
CU1 Enable continuous data output in current unit
CU0 Disable continuous data output in current unit
PC Send all implemented commands
Each command must end in CR LF suffix.
AEJ-C/AES-C/PLJ-C-BA-e-1412 95