KERN & SOHN GAB 30K-3PM - Manual (Page 26)

7.8 Weighing with tolerance range
You can set an upper or lower limit when weighing with tolerance range and thus
ensure that the material to be weighed remains exactly within the set limits.
Exceeding or dropping below the tolerance range is indicated by an audio sound or
optical signal.
Audio signal:
The audio sound depends on the setting in menu block “bP“ (see chap.8.2.)
Options:
• 0
No audio sound during tolerance weighing
• 1
An acoustic signal sounds when material to be weighed is within tolerance limits
• 2
An acoustic signal sounds when material to be weighed is beyond tolerance limits
Optical signal:
The arrow symbols indicate whether load is within the two set limits.
The icons provide the following information:
1. Material to be weighed above tolerance limit
2. Material to be weighed within tolerance range
3. Material to be weighed below tolerance limit
26 GAB-P-BA-e-1411