KERN & SOHN GAB 30K-3PM - Manual (Page 27)

Settings:
 In weighing mode press , the left number flashes and
the symbol „HI“ will be displayed.
 Enter upper limit by pressing and .
(example)
 Acknowledge with
.
The weighing scales will change to the display of the lower
limit.
 Enter the lower limit value and confirm with
(example)
 The scales will change to zero display
Weighing with tolerance range
 Tare when using a weighing container.
 Put on material to be weighed, tolerance control is started.
 The tolerance control is not active when the weight is under
20d.
 To finish tolerance weighing, set both limit values to zero.
GAB-P-BA-e-1411 27