KERN & SOHN OEX - Manual (Page 13)

• Connect the adapter to a power supply of 230V AC.
• For prolonged periods of inactivity disconnect the balance from the power supply.
• Press the ON/OFF
button and hold for approx. 1 second.
• After turning on the balance will carry out a self-test.
• Afterwards the balance will change to zero display, thus indicating readiness for
operation.
• The following icons will appear:
Zero indicator
Stability display
kg Weighing mode / weighing unit
7 Changing the installation site for the balance
• If the balance is to be taken to another installation site carry out all
the precautionary measures described in chapter 6 of these
operating instructions.
Doc.No.OEX-BA-e-1411 13