KERN & SOHN DE - Manual (Page 24)

DE-BA-e-1255 24
6.11 Animal weighing function
The balance has an integrated animal weighing function (mean value calculation).
With this function it is possible to weigh domestic or small animals exactly, although
they do not stand quiet on the weighing plate.
Note: If they move too much, an exact weighing will not be possible.
In the menu the animal weighing function can be switched on or off. To achieve this,
follow the sequence of operations below:
Switch-on the balance using the key and wait for the
„0“ display.
Press the key and keep it pressed until „UNIT“ appears on the display.
Press the key eight times, in the display appears „ANL“.
Confirm by pressing the key
Using the key select one of the following settings:
Display Function
„ANL“ Off Animal weighing function is switched off
„ANL“ 3 Weighing value calculation above 3 sec. till to the value
display
„ANL“ 5 Weighing value calculation above 5 sec. till to the value
display
„ANL“ 10 Weighing value calculation above 10 sec. till to the value
display
„ANL“ 15 Weighing value calculation above 15 sec. till to the value
display
Confirm the selected setting using the
key.
Operation:
Switch-on the balance using the ON key and wait for the
„0“ display.
Put the weighing good (animal) on the weighing plate and press the key. In the
display the preselected time is displayed in seconds and then is counted towards
zero. During this time the balance takes up several measuring values. When
reaching
„0“ sounds an acoustic signal and the calculated weighing value is
displayed.
By pressing the
key several times, the balance returns to the normal weighing
mode.
Repeated pressing of the
key activates this function anew.