KERN & SOHN KFU 1500V30M - Manual (Page 5)

KFU-IA-e-1211 5
3 Basic Information (General)
3.1 Documentation
This installation instructions contain all data about placement and commissioning of
the U-weighing bridges KERN KFU.
In combination with a display unit, in the following named weighing system, operation
and configuration can be seen in the manual of the display unit.
3.2 Proper use
The KERN KFU is designed for weighing Euro-pallets and containers with the
dimensions of Euro-pallets. It is provided for use as „non-automatic balance“. As
soon as a stable weighing value is reached the weighing value can be read.
3.3 Improper Use
Do not leave permanent load on the weighing plate. This may damage the measuring
system.
--
Impacts and overloading exceeding the stated maximum load (max) of the weighing
system, minus a possibly existing tare load, must be strictly avoided. This could
damage the weighing system.
Never operate the unit in explosive environment. The serial version is not explosion
protected.
Changes to the weighing system’s design are not permitted. This may lead to
incorrect weighing results, safety-related faults and destruction of the weighing
system.
The weighing system may only be operated in accordance with the described default
settings. Other areas of use must be released by KERN in writing.
3.4 Warranty
Warranty claims shall be voided in case
• Our conditions in the operation manual are ignored
• The appliance is used outside the described uses
• Structural changes of the unit
• Mechanical damage and damage caused by media, liquids
• Natural wear and tear
• The appliance is improperly set up or incorrectly electrically connected
• Overloading of the measuring system