KERN & SOHN VFB 2T-3 - Manual (Page 22)

VFB-BA-e-1310 22
Invoke menu item
, see chapter 9.1 “How to invoke a menu“.
How to carry out adjustments
 Acknowledge with
.
Ensure that there are no objects on the weighing plate.

 Wait for stability display, then press
. The currently set
adjustment weight will be displayed. (example)
 To change by using the navigation buttons (see chap.
5.10.1) select the desired setting, the active digit is flashing.
 Acknowledge by .
 Carefully place adjusting weight in the centre of the weighing
plate. Wait for stability display, then press .
 After the adjustment the balance will carry out a self-test. Err
4 will appear briefly, followed by weighing value. The system
is now in weighing mode.
 Remove weight, „0“ is displayed.
An adjusting error or incorrect adjusting weight will be
indicated by the error message; repeat adjustment
procedure.