KERN & SOHN VFB 2T-3 - Manual (Page 26)

VFB-BA-e-1310 26
8.4 Weighing units switch-over
Press the button to set the different weighing units.
These must be activated before in the menu (chap. 9.2).
How to enable weighing units:
+

 Press
until is displayed
 Press , or is displayed with the respective weighing unit.
 Use
to change between and , thus activating [on] /
deactivating [off] the displayed weighing unit.
 Use to save the selected setting
 Repeat sequence for each desired weighing unit.
 Press repeatedly and the device will return to weighing mode.
How to change weighing units:
 To return to the previously enabled weighing units go to weighing mode by