KERN & SOHN HCN 200K500IP - Manual (Page 24)

HCB_HCN-BA-e-1340 24
4.3 Checking the original dimensions
 Enter the original dimensions shown on the production data sheet in the grey
boxes of checklist chap. 8.3.
 Check original dimension of suspended balance; for implementation see chap.
8.3 „Regular Maintenance“
 Enter all data (date, tester, results) in the first line under „Inspection before first
use“ in the checklist (see chapter 8.3)
CAUTION
If the dimensions of your first safety inspection do not match those
of KERN, the balance must not be put into operation. In this case
please contact a service partner authorised by Messrs. KERN.
4.4 Battery operation
Models HCB Models HCN
3 x 1.5V AA batteries 2 x 1.5V AA batteries
If the batteries are empty, in the balance display appears “
LO”. Press ON/OFF-key
and replace the batteries.
Open battery compartment, replace batteries and close battery compartment again.
In order to save the battery, the balance switches automatically off after 4 minutes
without weighing This auto-off function can be deactivated in the menu, see chap. 6.
When the suspended balance is out of operation for a longer period, remove the
batteries.