KERN & SOHN HFC 10T-3 - Manual (Page 27)

5.7 Switch-over weighing unit
To switch over the weight value to the units enabled in the menu press the UNIT-key
repeatedly (See chap. 6, “F2unt“).
Example, when in the menu all units are set to “on”:
Every time the UNIT-key is pressed, the next weighing unit will be displayed.
kg
 lb N.
The indicator
 above N shows weight in Newton.
5.8 Hold weighing value (Data-HOLD function)
Once a stable weight value has been established, this can be fixed until deleted
before the next weighing activity.
Menu setting “P4 HLd
HoLd“, see chap. 6

Suspend the material to be weighed

Press to fix the current weight value.
The indicator HOLD appears.

The weighing value will be held in the display until it is deleted by .
HFC-BA-e-1511 27