KERN & SOHN HFC 10T-3 - Manual (Page 42)


Wait for stability display „STABLE“, then press .
As soon as “LoAd 3“ is displayed attach third adjustment
weight (max).

Wait for stability display, then press .

After successful adjustment „Pass“ will be displayed.
Afterwards the balance will carry out a self-test.
“Err19“ will appear briefly (Ignore error message), then the
balance will change automatically into weighing mode and
the total weight will be displayed.
Linearization has now been completed successfully.
(example)
42 HFC-BA-e-1511