KGUARD Security SHA24 - Manual (Page 13)

ENGLISH
Chapter 2: Installation
DVR User’s Manual
13
TX+ TX-
1
2
3
4
1
2
VIDEO
INPUT
VIDEO OUTPUT
7
8
5
6
VIDEO
INPUT
2
1
2
1
4
3
AUDIO INPUT AUDIO OUTPUT
VGA
DC 12V LAN
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT OPEN COVERS. NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
DC 12V
2.2 Connecting the Power
Use only the supplied power adapter and power cord that came with the DVR.
1
Properly connect one end of the power adapter into the power cord.
2
Plug the other end of the power adapter to the power connector on the back of the DVR.
3
Plug the other end of the power cord into the wall outlet. The DVR automatically powers on.
2.3 Connecting to Monitors
The preview screen can be displayed on monitors via BNC or VGA connection.
2.3.1 BNC Connection
Connect the video output of the DVR to the monitor via BNC connector as shown.
TX+ TX-
1
2
3
4
1
2
VIDEO
INPUT
VIDEO
OUTPUT
7
8
5
6
VIDEO
INPUT
2
1
2
1
4
3
AUDIO
INPUT
AUDIO
OUTPUT
VGA
DC 12V LAN
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK. DO NOT OPEN COVERS. NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE UNITS NOT SPECIFICALLY DESIGNED
FOR OUTDOOR USE TO RAIN OR MOISTURE.
1
2
VIDEO
OUTPUT
Monitor
Monitor
BNC cable
BNC cable
Power adapter
Power cord
Wall outlet