KGUARD Security SHA24 - Manual (Page 52)

ENGLISH
Chapter 4: Using the DVR
52
DVR User’s Manual
3
Do one of the following:
• Click Power Off to turn off the DVR.
• Click Reboot to reboot the DVR.
4
A message appears, click OK to confirm the operation.
Note:
When turning off the DVR, wait for the message “Now you can power off!” to appear on the screen, then unplug
the power cord from the power outlet.
Set Auto Maintenance
Use this feature to automatically reboot the DVR on a specified schedule. When the DVR reboots, all settings and data
are refreshed from the memory, which optimizes the DVR performance.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > MAINTAIN.
3
Set Auto Maintain to Enable.
4
In Auto Reboot, select the frequency to reboot the DVR. Options are:
• Everyday: Reboots the DVR on a daily basis. If this option is selected, specify the time you want to reboot the
DVR.
• Every Week: Reboots the DVR on a weekly basis. If this option is selected, specify the day of the week and the
time to reboot the DVR.
• Every Month: Reboots the DVR on a monthly basis. If this option is selected, specify the date (1 to 31) and the
time to reboot the DVR.
Note:
The illustration above is an example of Auto Reboot set to Every Week. The available fields vary depending on the
selected Auto Maintain and Auto Reboot options.
5
After all settings are complete, click Apply.
6
When data saving is complete, click OK.
« TIP »
To restore the maintenance schedule to default setting, click Default at the bottom of the screen.