KGUARD Security SHA24 - Manual (Page 69)

ENGLISH
Chapter 5: KGuard Web Client
DVR User’s Manual
69
3
Enter the User Name and Password you use to login to the DVR.
4
On Server Port, enter the monitoring port of your mobile device. The port range is between 1024 to 65535.
Note:
The Server Port specified here must be the same port on your mobile device.
5
To save, click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications and retain the existing settings, click Refresh at the bottom of the screen.
After performing the above procedures, install the Kguard mobile device utility on your mobile device.
See
“Chapter 6: Using KView Series Software” on page 75 for further details.
Motion Detection Setup
Use the Motion menu to remotely enable and configure motion detection. When motion is detected on a marked
area, the alarm is triggered.
To configure motion detection, do the following:
1
On the Main Menu, click Remote Setting.
2
On the left panel, click Device > Motion. The Motion screen appears.
3
On Channel, select the channel where you want to setup motion detection.
4
On Motion Detection, select Enable.
5
On Sensitivity, select the motion sensitivity level from 1 to 8, wherein 1 is the least sensitive and 8 the most
sensitive.
6
Click Area to display the motion detection area screen.