KGUARD Security EL1622 - Manual (Page 18)

ENGLISH
Easy Link PRO Series: Quick Setup Guide
18
DVR User’s Manual
Step 4: Power ON the DVR
Follow the instructions on the diagram, to power on the DVR.
NOTE: The 4-channel / 8-channel DVR do not have a classical power switch. The device starts up automatically after
you apply the power via power adapter. As to 16-channel DVR, after you apply the power via power adapter, use the
Power switch to turn on the DVR.
RS-485 ALARM
SENSOR
G 1 2 3 4 G 5 6 7 8
HDMI
5
6
7
8
1
2
AUDIO
OUTPUT
1
2
3
4
13
14
15
16
9
10
11
12
VIDEO INPUT
3
4
AUDIO
INPUT
VIDEO OUTPUT
LAN
VGA
IR-EXT
12V
VIDEO
INPUT
LAN
RS-485 VGA
12V
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
HDMI
5
6
7
8
1
2
AUDIO
OUTPUT
1
2
3
4
VIDEO
INPUT
AUDIO
INPUT
VIDEO
OUTPUT
12V
B) Plug in the power
adapter to the power
outlet.
A) Connect the power
adapter to the Power
input on the rear of
the DVR.
4-Channel DVR / 8-Channel DVR
16-Channel DVR
C) Switch on the DVR.
NOTE : This applies only
to 16-channel DVR.
After the DVR is powered on, the Startup Wizard appears on your monitor/TV screen (please see the next step). If it
is the first time you power ON the DVR, we recommend to go through the wizard and fill in the various setup options
available.
NOTE: If you decide to skip the Startup Wizard, you can still access all the setup options later via the DVR’s OSD menu.