KGUARD Security EL1622 - Manual (Page 77)

ENGLISH
Easy Link PRO Series: Operating the DVR
DVR User’s Manual
77
• Show Message: Check the box to display “ M “ icon on the screen when the motion is detected.
• Buzzer: The DVR can use its internal buzzer to emit an alarm tone. By default this feature is OFF but if you want,
you can set the buzzer duration in seconds when the motion is detected.
• Send Email: You can let the DVR to send you an auto-e-mail when the motion is detected. To set up the e-mail
schedule, see “Network: Email” on page 72.
• Full Screen: If this function is enabled and the motion is detected, the corresponding channel will be displayed in
full screen.
• Record Channel: You can check the box to enable recording and then select the channels to record when the
motion is detected.
• Post Recording: You can set how long after an event occurs that the DVR will continue to record. The
recommended recording length is 30 seconds but it can be set higher up to 5 minutes.
Other Alarm Settings (16-Channel only)
To configure what actions the DVR should do when sensors are triggered.
• Alarm In: Select which channels to respond when sensors are triggered.
• Alarm Type: Select the alarm and sensor type: NO (Normal-Open), NC (Normal-Close), or OFF to disable alarm
functions.
• Alarm Out: If an external alarm device is connected, check the checkbox to make the device sound the alarm
when sensors are triggered.
• Dwell Time: Select the alarm sound duration (10S/20S/40S/60S) when sensors are triggered.
NOTE: For Show Message, Buzzer, Send Email, Full Screen, Record Channel, and Post Recording fields, please see the
description above ( “Set Motion Detection Area” on page 76 ).