Network: ddns – KGUARD Security EL1622 User Manual
Page 73
ENGLISH
Easy Link PRO Series: Operating the DVR
DVR User’s Manual
73
Network: DDNS
The reason why you may need to configure DDNS settings is when your DVR is connected to a network where the IP
address is assigned by the DHCP server (see
). In this case, every time you start up
the DVR, the IP address will change. A dynamic IP address is a problem when you want to connect remotely to the
DVR via PC (see
“Remote Access Via Web Client” on page 93
). As a solution, you can use the DDNS (Dynamic DNS)
service. The DDNS provides a static address to simplify remote connection to your DVR.
To use the DDNS, you first need to open an account on the DDNS service provider’s web page. For example,
KGUARD.ORG
:
http://www.kguard.org
.
• DDNS: Enable the DDNS service.
• Server: Select the preferred DDNS server. The available options are KGUARD.ORG (recommended), DYNDNS,
NO-IP, CHANGEIP, DNSEXIT.
NOTE
: If you do not have a DDNS account yet, you need to create one on the DDNS service provider’s web page.
• Host Name: Enter the domain name you created on the DDNS service provider’s web page. For example,
mydvr4.kguard.org. This will be the address you type in the URL box when you want to connect remotely to the
DVR via PC.
• User Name/Password: Enter the user name and password you obtained when creating an account on the DDNS
service provider’s web page. For example, username for KGUARD.ORG users is the e-mail address you used when
creating the account on KGUARD.ORG web page.
To test the DDNS settings, click DDNS Test. If all settings are OK, the following message appears:
NOTE:
Please make sure you have completed the configuration of the DVR’s network settings.