KGUARD Security EL1622 - Manual (Page 23)

ENGLISH
Easy Link PRO Series: Quick Setup Guide
DVR User’s Manual
23
Network Configuration
Network settings should be configured if you want to connect to the DVR remotely for live viewing or for example, if
you want the DVR to synchronize the date and time automatically.
Type: Select the network type you are using. The most common types are DHCP or Static. Most probably your network
type is DHCP, unless the network is manually addressed (usually called- Static).
NOTE: If your network type is Static, ask your ISP for assistance on determining the IP address, Subnet mask, Gateway,
and DNS 1/2 server. If your network type is DHCP, your DVR will obtain the connection parameters, like IP address,
Subnet Mask, Gateway and DNS 1/(2) automatically.
Client Port and HTTP Port: For time being, keep the default port values. Client and HTTP ports are important to
configure before accessing the DVR remotely from a PC via HTTP Interface or smart phone/tablet.
For the first time startup, you do not need to configure Email or DDNS.
Click Apply. A notification message appears on the screen, click OK.
Another notification messages appears on the screen, asking your confirmation to disable Startup Wizard after reboot.
Click Yes.
The DVR will reboot.