Chapter 3: getting started, 1 starting up, 2 shutting down – KGUARD Security OT801 User Manual
Page 19: 1 starting up 3.2 shutting down
ENGLISH
Chapter 3: Getting Started
DVR User’s Manual
19
Chapter 3: Getting Started
3.1 Starting Up
1
Connect the power adapter to the DVR. See
“2.2 Connecting the Power” on page 13
for further details.
2
Turn on the power switch on the front panel of the DVR. The DVR automatically powers on and displays the channels
screen.
3.2 Shutting Down
To properly turn off the DVR power, do the following:
1
In the preview mode, right-click on the mouse to display the pop-up menu.
2
Select Main Menu > SYSTEM > MAINTAIN, and double-click Power off.
You can also access the main menu by pressing the MENU button on the remote control.
3
A warning message appears on the screen, select OK to turn off the power.
4
Wait until the “Now you can power off!” message appears on the screen.
5
Turn off the power switch on the front panel of the DVR and then unplug the power cord from the power outlet.