KGUARD Security OT801 - Manual (Page 67)

ENGLISH
Chapter 5: KGUARD Web Client
DVR User’s Manual
67
5.5.4 PTZ Settings
When a PTZ camera is installed, use the PTZ menu to customize its settings.
1
On the Main Menu, click SETUP.
2
On the left panel, click PTZ. The PTZ Setup screen appears.
3
On the PTZ submenu, select the channel where the PTZ camera is installed.
4
Set the PTZ control Protocol, Baud Rate, Data Bit, Stop Bits, and Address.
Note:
Check the PTZ camera specifications for the correct settings.
5
Set Auto Cruise to On or Off, and select a Verify option (None/Odd/Even/Mark/Space).
6
To save, click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications or close the screen, click
.