KGUARD Security OT801 - Manual (Page 44)

ENGLISH
Chapter 4: Using the DVR
44
DVR User’s Manual
6
When data saving is complete, click OK.
4.4.5 Setting Motion Detection
For added security, enable the motion detection feature. When motion is detected on a selected area, the DVR issues
an alarm notification.
To configure motion detection, do the following:
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > DEVICE > MOTION.
3
In Channel, select the channel to activate motion detection.
4
In Motion Detection, select Enable.
5
In Sensitivity, select the motion sensitivity from 1 to 4, wherein in 1 is the least sensitive and 4 the most sensitive.
6
Click Setup.
7
A grid screen with a green cursor appears. By default, the whole screen is marked for motion detection (red block).
If you want to disable motion detection on an area, click the grid cursor and then drag the mouse to highlight the
scope to unmark the area (transparent block) for motion detection.
8
To close the grid screen, click the right mouse button.
9
After all settings are complete, click Apply.
10
When data saving is complete, click OK.
When motion detection is enabled on a channel, the channel screen displays the motion detection icon M .
« TIP »
To copy the current settings to other channels, select the channel(s) in Copy To and then click Copy.