LAARS IGI-180C - Installation Manual - Manual (Page 31)

31
Parts & Dimensions
Components needed for direct vent applications :
Figure 19 Figure 20
1) horizontal discharge adapter 2) vertical discharge adapter
BWC p/n 239-44506-00 BWC p/n 239-44500-00
Figure 21 Figure 22
3) wall discharge terminal plate 4) rubber wall
Length = 12” (305mm)
BWC p/n 239-46848-00 Part of BWC vent kit
Figure 23 Figure 24 Figure 25
5) vent extension 6) 45º vent pipe elbow 7) 90 º vent pipe elbow
10” BWC p/n 239-44496-00 (sold in pairs only) BWC p/n 239-44499-00
19.5” BWC p/n 239-44497-00 BWC p/n 239-44495-00
39” BWC p/n 239-44498-00
WARNING
Improper installations of vent system and components, or failure to follow all installation instructions,
can result in property damage or serious injury.