LABEC J-WD - Manual (Page 4)

SAFETY SYMBOLS
This operation manual and this product use the following safety symbols. Please keep in mind the
meaning of each of the symbols to ensure safe use of the product and to prevent any damages,
accidents, or problems resulting from negligence of these safety symbols. (As using symbols may
depend on the product, not all of the symbols may be used.)
SAFETY SYMBOLS
SAFETY SYMBOLS
Indicates the possibility of personal
injury or death. Never fail to follow
the operating procedure.
Do not proceed beyond a WARNING
sign until the noted conditions are
fully met to satisfactory and
understood.
Indicates the existence of possibility
of damage to the product or to the
operator in operation.
Never fail to follow the operating
procedure.
Indicates the existence of possibility
of damage to the product or to the
operator in operation when cautions
are not observed and followed
properly.
Indicates additional information such
as general warning, caution, risk of
danger, and operating procedure.
When this mark is indicated on the
product, refer the relevant section of
the Operation Manual.