LABEC J-WD - Manual (Page 8)

3.2 How to install
• Use with a minimum distance all around of 20cm from walls of other items.
• Locate in a flat place.
• Connect the power cord to an outlet with earthling point.
• In case of connecting to an outlet without earthling point, connect lead wire to the earth after
connecting grounding adapter.
3.3 How to ground Earth wire
• Earth wire must be grounded to prevent any electrical accidents.
• Improper or no grounding may cause electrical shock.
• Grounding terminal is included in the power plug.
• Therefore, there is no need to earth if plug in connected to a consent with grounding
terminal.
• If grounding terminal with consent is not available, install adapter to plug to ground earth wire
from green terminal or install earth wire to the grounding terminal of the equipment.
4. Appearance, names & how to operate.
4.1 Appearance and names
1. Distilled Water Outlet
2.Cooling Water Inlet Port
3. Drain Valve for Boiler Tank
4. Cooling Water Drain Port)
5. Power Plug
6. Operation Display Lamp
7. Cooling Water Drain
8. Fastening Bolt
9. Overflow Pipe