Longshine GT150 - Manual (Page 51)

EMB-M3 User`s Manual 43
Item Options Description
IDE HDD
Auto-detection
Press Enter Press Enter to auto-detect the
HDD on this channel. If
detection is successful, it fills the
remaining fields on this menu.
IDE Primary Master None
Auto
Manual
Selecting ‘manual’ lets you set
the remaining fields on this
screen. Selects the type of fixed
disk. "User Type" will let you
select the number of cylinders,
heads, etc.
Note: PRECOMP=65535 means
NONE !
Capacity Auto Display your
disk drive size
Disk drive capacity
(Approximated). Note that this
size is usually slightly greater
than the size of a formatted disk
given by a disk checking
program.
Access Mode CHS
LBA
Large
Auto
Choose the access mode for this
hard disk
The following options are selectable only if the ‘IDE Channel 0 Master’ item is
set to ‘Manual’
Cylinder Min = 0
Max = 65535
Set the number of cylinders for
this hard disk.
Head Min = 0
Max = 255
Set the number of read/write
heads
Precomp Min = 0
Max = 65535
**** Warning: Setting a value of
65535 means no hard disk
Landing zone Min = 0
Max = 65535
****
Sector Min = 0
Max = 255
Number of sectors per track