Longshine GT150 User Manual
Page 55
EMB-M3 User`s Manual
47
CPU L1 & L2 Cache
These two categories speed up memory access. However, it depends
on CPU/chipset design.
Enabled Enable
cache
Disabled Disable
cache
Quick Power On Self Test
Allows the system to skip certain tests while booting. This will
decrease the time needed to boot the system.
Enabled Enable quick POST
Disabled Normal
POST
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
The Choice: Floppy, LS120, ZIP100, HDD-0, HDD-1, HDD-2,
HDD-3, CDROM, Disabled, Enabled, USB-FDD, USB-ZIP,
USB-CDROM, USB-HDD,
LAN, SCSI.
Swap Floppy Drive
If the system has two floppy drives, choose enable to assign physical
drive B to logical drive A and vice-versa.
The choice: Enabled, Disabled.
Boot Up Floppy Seek
Enabled tests floppy drives to determine whether they have 40 or 80
tracks.
The choice: Enabled, Disabled.
Boot Up NumLock Status
Selects power on state for NumLock.
The choice: On/Off.