Longshine GT150 - Manual (Page 72)

64 EMB-M3 User`s Manual
Resources controlled by
BIOS can automatically configure all the boot and Plug and Play
compatible devices. If you choose Auto, you cannot select IRQ DMA
and memory base address fields, since BIOS automatically assigns
them.
The choice: Auto (ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt. This item
allows you to determine the IRQ assigned to the ISA bus and is not
available to any PCI slot. Legacy ISA for devices compliant with the
original PC AT bus specification, PCI/ISA PnP for devices compliant
with the Plug and Play standard whether designed for PCI or ISA bus
architecture.
The Choice: Legacy ISA and PCI/ISA PnP.
PCI/VGA Palette Snoop
Leave this field at Disabled.
Choices are Enabled, Disabled.