Malone MPG460XT User Manual
Page 10
MPG460XT
800-295-0042 ext 206
10
6. Wiggle the spring eyes into the front hanger
brackets and bolt using 1/2” x 3” bolts and self lock-
ing nuts. Nuts to the inside. Tighten the shackle
bolts ONLY until they grip the sides of the brackets.
Remember, this is a hinge. The bolt should remain
still in the bracket allowing the spring eye to move
freely.
8. Slip the hub caps thru the wheels from
the back then mount the wheels onto the
hubs. Hand tighten the lug nuts.
7. Now that the axle assembly is attached
to the frame, tighten the axle plate U-bolts
evenly until there is a slight bend in the tie
plates. Don’t over tighten.
9. Grasp the front of the trailer, lift with your
knees and step around the trailer when it
balances on the rear of the frame, then let it
down onto the tires.
ALWAYS BEND FROM YOUR
KNEES WHEN LIFTING.
IF THE TRAILER IS TOO
HEAVY FOR YOU TO LIFT
SAFELY, STOP, GET SOME
FRIENDS TO ASSIST YOU.