Malone MPG460XT User Manual
Page 18
Advertising
MPG460XT
800-295-0042 ext 206
18
3. Tighten bolts fully and repeat for other side.
Note that when bolting the mounting brack-
ets to the frame you will install a washer on
both sides, under the head of each bolt and
under each nut.
2. Using 3/8” x 1” bolts, washers on both
sides, and nuts, attach the fender brackets
to the slotted holes in the frame as shown.
NOTE you will use the center hole in the
bracket and the outside two slotted holes in
the frame.
Advertising