Malone MPG460XT - Manual (Page 7)

800-295-0042 ext 206
[email protected]
7
MPG460XT
8. Bolt the tongue support to the frame rails
using 3/8” x 1” carriage head bolts. Note
the square heads go on the outside with the
square holes in the frame. Assemble with
washers and nuts on the inside. Don’t fully
tighten.
9. Install the 1/2” x 3-1/4” bolts with washers on both sides thru the
retractable tongue
box.
Don’t fully tighten.
10. FRAME BOLT TIGHTENING: Starting at the rear corners of the frame and fully
tighten each bolt, working to the front, fully tighten all frame bolts ending with the
1/2” bolts thru the retractable tongue box. You don’t have easy access to tighten the
rear tongue support bolt until after you fl ip the trailer over.