Page 16, Removing packing restraints, Input and output spindles – MF Digital DIRECTOR CD/DVD Combo Series (Rev: 08/01/02) User Manual
Page 17
DIRECTOR Series Operator’s Guide
Document Revision: 0802
Page 16
Removing Packing Restraints
The DIRECTOR ships with a picker arm restraint to reduce the possibility of
damage in transit. This restraint must be removed before operation or power-
on. Remove the foam block above the transfer arm. Save the foam block, as
you will need to return it to its place if you need to transport the unit in the
future.
Input And Output Spindles
The input and output spindles serve as the containers to store the blank and
recorded discs and must be assembled and installed before operating the
DIRECTOR unit. Each spindle can hold 250 discs and consists of two pieces;
a composite spindle base and a threaded metal spindle spike.
Assembling The Spindles
Assemble each spindle by screwing the metal spindle spike into the top of the
composite spindle base and turn clockwise until snug.