Page 20, Making the connection (thermal transfer) – MF Digital DIRECTOR CD/DVD Combo Series (Rev: 08/01/02) User Manual
Page 21
Advertising
DIRECTOR Series Operator’s Guide
Document Revision: 0802
Page 20
Making The Connection (Thermal Transfer)
•
Make sure the printer power switch is set to the off position.
•
Connect the supplied parallel printer cable to the printer port on the back
of the Spectrum2 and to the parallel port on the back of the host
computer.
•
Connect one end of the power cord to the VAC Out on the Spectrum2 and
the other to the wall power outlet.
•
Install the ribbon as shown in the Spectrum2’s documentation.
Advertising